CDVI WIRELESS S.P.A. GDR Manuale Utente
4 - MEMORIZZAZIONE DEI TRASMETTITORI
If the memory is full when you try to memorize one more transmitter LD flashes 3 times and the procedure ends.
8 - ERASING TRANSMITTERS FROM THE MEMORY
4 - MEMORIZZAZIONE DEI TRASMETTITORI
6 - PROGRAMMING TRANSMITTER AND RECEIVER
P1
LD
4s
LD
7 - MEMORY FULL
Procedure
1) Press and hold the push-button P1 for 4 sec. until the
green led LD comes ON ( Fig. 4); the led display the current
operating mode according to par. 4.
2) Press the transmitter button down : LD switches OFF and
ON again, waiting for another tx to memorize;
3) If within 10 sec. no more transmitters are activated, LD
switches OFF and the procedure is over.
1) Press and hold the push-button P1 for 4 sec. until the
green led LD comes ON ( Fig. 4); the led display the current
operating mode according to par. 4.
2) Press the transmitter button down : LD switches OFF and
ON again, waiting for another tx to memorize;
3) If within 10 sec. no more transmitters are activated, LD
switches OFF and the procedure is over.
P1
4s
Fast
blinking
Blinks: Latch
Steady ON: Pulse
Procedure
1) Press and hold the push-button P1 for 4 sec. until the green led LD comes ON ( Fig. 5); the led display the current operating mode
according to par. 4.
2) Press and hold P1 for more 4 sec. : LD begins to blink fast.
At this point you can do 2 different operations:
1) Press and hold the push-button P1 for 4 sec. until the green led LD comes ON ( Fig. 5); the led display the current operating mode
according to par. 4.
2) Press and hold P1 for more 4 sec. : LD begins to blink fast.
At this point you can do 2 different operations:
A ) DELETE THE SINGLE TRANSMITTER
Press the button down of the transmitter to delete. LD flashes twice slow and then begins again to blink fast for more tx to delete.
If within 10 sec. no more transmitters are activated, LD switches OFF and the procedure is over.
If within 10 sec. no more transmitters are activated, LD switches OFF and the procedure is over.
B ) ERASE ALL THE MEMORY
Press and hold P1 for more 4 sec. : LD makes 3 slow flashes then switches off and the procedure ends.
Press and hold P1 for more 4 sec. : LD makes 3 slow flashes then switches off and the procedure ends.
P1
IS-GDRUAUK Rev. 3 del 10/06/2008
A
Fig. 4
P1
10 Sec.
LD
4s
TX
LD
LD
A
TX
P1
4s
LD
10 Sec.
LD
LD
LD
2 slow
flashes
LD
Fast
blinking
End
3 slow
flashes
End
Fig. 5
End
USAutomatic LTD
118 Hillside Drive
Lewisville, TX 75057
1-866-711-0001
www.sentrygateopener.com
WARRANTY
USAutomatic, LTD warrants this product to be free of defects in materials and
workmanship for 2 YEAR. For a period of 2 YEAR following purchase
USAutomatic, LTD. will repair or replace the product free of charge, including
parts, shop labor and return shipping and handling.
workmanship for 2 YEAR. For a period of 2 YEAR following purchase
USAutomatic, LTD. will repair or replace the product free of charge, including
parts, shop labor and return shipping and handling.
This 2 YEAR warranty does not cover the plastic case from normal wear or
damage due to misuse of the receiver or transformer. Modifications to the
supplied transformer will void the warranty.
damage due to misuse of the receiver or transformer. Modifications to the
supplied transformer will void the warranty.
To have the product sent for warranty consideration, it must be returned with
the proof of purchase and a return authorization number. To obtain a return
authorization number please visit
the proof of purchase and a return authorization number. To obtain a return
authorization number please visit
or call 1-888-
711-0001 for assistance.
The return authorization number must be clearly marked on the outside of the
return package or it may not be accepted.
return package or it may not be accepted.
www.sentrygateopener.com
FCC ID : PWJGDR
This device complies with
FCC Rules . Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept interference received, including interference
that may cause undesired operation.
(1) This device may not cause harmful interference, and
(2) this device must accept interference received, including interference
that may cause undesired operation.
Part. 15 of the
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
for compliance could void the user's authority to operate the equipment.