Microsoft Corporation RM-2 Manual De Usuario
M e n u f u n c t i o n s
96
■ Radio (Menu 6)
Note: Your phone must be switched on to use this
function. Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
function. Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
To listen to the radio on your phone, connect the compatible headset to
the headset connector on the bottom of the phone. The lead of the
headset functions as the radio antenna, so let it hang freely.
the headset connector on the bottom of the phone. The lead of the
headset functions as the radio antenna, so let it hang freely.
Note that the quality of the radio broadcast depends on the radio
station’s coverage in that particular area.
station’s coverage in that particular area.
1. To turn on the radio, press
Menu
and select
Radio
. The following are
shown on the display:
• The channel location number and the name of the radio channel,
if you have previously saved it.
• The frequency of the radio channel.
2. If you have pre-saved radio channels, you can scroll to the channel
that you would like to listen to, or select a radio channel location
from 1 to 9 by pressing the corresponding number key.
from 1 to 9 by pressing the corresponding number key.
When using the compatible headset, press the headset key to scroll
to the desired radio channel that you have saved.
to the desired radio channel that you have saved.
3. When the radio is on, press
Options
and select
Switch off
to turn off
the radio.
Tip: To return to standby mode, press
briefly; to quickly turn
off the radio, press and hold
.
Tuning a radio channel
When the radio is on, move the joystick up or down to start the channel
search. Searching stops when a channel has been found. To save the
channel, press
search. Searching stops when a channel has been found. To save the
channel, press
Options
and select
Save channel
. Key in the name of the
channel and press
OK
. Select the location to which you want to save the
channel.
Tip: To quickly save the channel in locations 1 to 9, press and hold
the corresponding number key, then key in the name of the
channel and press
the corresponding number key, then key in the name of the
channel and press
OK
.
rm-2_en1_FCC.fm Page 96 Monday, February 16, 2004 8:14 AM