HydroPoint data systems inc. WT008 Manual De Usuario

Now change the Destination Station (Turn the Lower Line dial 
“To STA 04.”)

Now press the “COPY” button.

The display will change briefly to this:

Then the display will change back to this:

Another example of the COPY function is:

This will copy program data from Station 1 to all stations of the
controller.

If you want to make minor changes to the copied data,

simply turn the Function Selector dial to “PROGRAM,” set the
Station number, and edit as needed.

COPY FROM STA 01

To ALL STA's (Press COPY)

COPY FROM STA 03

To STA 04 (Press COPY)

COPYING                 DONE!

COPY FROM STA 03

To STA 04 (Press COPY)

Programming Your WeatherTRAK ET Plus

51

This erases all station programming and restores factory-set
defaults to individual stations or all stations.

This erases all schedules and restores factory-set defaults to all 
schedules.

This erases all user selections and restores the factory-set defaults
for the “Setup” feature.

Copy From the Station Number
1.

Turn the Function Selector dial to “COPY.”

The display will look like this:

Turn the Upper Line dial to select the desired source station:

•

Station 1, 2, 3, ... to last available station on controller.

To Station Number (Press Copy)
1.

Turn the Lower Line dial to the desired destination. These
include:

•

Station 1, 2, 3, ... to last available station on controller, and

•

All Stations.

Press the “COPY” button.

For this example, we will copy the program information from
Station 3 to Station 4. (Turn the Upper Line dial to “COPY FROM
STA 03.”)

COPY FROM STA 03

To STA 02 (Press COPY)

COPY FROM STA 01

To STA 02 (Press COPY)

Programming Your WeatherTRAK ET Plus

50