HydroPoint data systems inc. WT008 Manual De Usuario
Reviewing
The Review feature lets you look at each station’s entire irrigation
schedule with a turn of the dial.
schedule with a turn of the dial.
The following are examples of Review displays for each Program
mode.
mode.
1.
Turn the Function Selector dial to “REVIEW.”
If using the Fully Automated Mode the display will look like
this:
this:
2.
Turn the Lower Level dial to see up to week 8.
Reading from left to right, the upper line of the display shows:
•
STA 01
Station Number
•
04.6 MIN
Length of cycle in Minutes
•
03X
Number of cycles
•
AUTO
Program Mode
•
Station 1 will irrigate for 4.6 minutes per cycle, run for 3
cycles, and is in the Fully Automated Mode.
cycles, and is in the Fully Automated Mode.
Reading from left to right, the Lower Line of the display shows:
•
Wk1:-M-W-FS
Watering days for Week 1
(current week)
(current week)
•
+10%
ADJUST setting
•
H
High ET Start will operate
•
Soak 30
Soak time
In summary, the review shows:
•
The watering days are Monday, Wednesday, Friday and
Saturday,
Saturday,
•
There is one Irrigation Start time,
•
there is an “Increase ADJUST setting of 10% (see following
section on ADJUST) ,
section on ADJUST) ,
•
there is a “High ET Start Time” in effect, and
•
there is a 30 minute Soak period between cycles.
STA 01 04.6 MIN 03X AUTO
Wk1:-M-W-FS +10% Soak30
Programming Your WeatherTRAK ET Plus
55
Copy Setup Defaults
1.
1.
Turn the Function Selector dial to “COPY.”
You will see the following display:
You will see the following display:
2.
Turn the Upper Line dial past all of the “COPY FROM STA 01,
02, 03...” displays through to the last Station on your controller,
and past “COPY PROGRAM DEFAULTS” and past “COPY
SCHEDULE DEFAULTS.” The next display is:
02, 03...” displays through to the last Station on your controller,
and past “COPY PROGRAM DEFAULTS” and past “COPY
SCHEDULE DEFAULTS.” The next display is:
The lower line of the display shows the only setting for this
feature.
feature.
3.
Press the “COPY” button to complete the process. The display
will change briefly to this:
will change briefly to this:
Then the display will change to this:
The Setup defaults are now restored.
COPY SETUP DEFAULTS
(Press COPY)
COPYING DONE!
COPY SETUP DEFAULTS
(Press COPY)
COPY FROM STA 01
To STA 02 (Press COPY)
Programming Your WeatherTRAK ET Plus
54