HydroPoint data systems inc. WT008 Manual De Usuario

This is what the display looks like when Station 4 is set for 10.0
minutes.

Repeat this pattern of selecting a station to manually water for
the desired amount of time until complete.

MANUAL irrigation starts immediately on the first station that
had a time entered. 

There are 9.9 minutes remaining on station 4. When irrigation
has finished on this station, the screen will change to this:

In manual operation, the controller will run the stations in

their numerical order, which may not be the order in which they
were entered.

Manual Water All Stations
1.

Turn the Function Selector dial to “MANUAL.”

The display will look like this:

MANUAL WATER

Specific Stations

MANUAL WATER SET STA 04

00.0 Minutes

MANUAL WATER SET STA 04

09.9 Minutes     NOW ON

MANUAL WATER SET STA 04

10.0 Minutes

Using Special Features

69

Manual Water Specific Stations
1.

Turn the Function Selector dial to “MANUAL.”

The display will look like this:

Leave the setting at the default of “Specific Stations.” The choices
are: 

•

Specific Stations (Default Setting), or

•

All Stations.

The process to manually water specific stations is to first set the
station with the Upper Line dial, and then set the amount of time
with Lower Line dial. 

Turn the Upper Line dial to the next position.

You can set each station for a different time. In this example, we
will set Station 4 to water for 10 minutes. 

Turn the Upper Line dial to “STA 04”. The other settings
include:

•

STA 01 thru 12 (Default Setting: STA 01)

The lower line shows the default setting. Only whole minutes are set.

Turn the Lower Line dial to “10.0.” The other settings include:

•

00 to 99 (Default Setting: 00.0).

MANUAL WATER SET STA 01

00.0 Minutes

MANUAL WATER

Specific Stations

Using Special Features

68