HydroPoint data systems inc. WT008 Manual De Usuario
Communication Status Alert
The display will look like this:
This will appear if the ET Everywhere Service has failed to
communicate for 10 days. For these 10 days, WeatherTRAK ET plus
will use the last received ET to calculate programs. After 10 days, it
will default to use the MAX Backup ET from Setup.
communicate for 10 days. For these 10 days, WeatherTRAK ET plus
will use the last received ET to calculate programs. After 10 days, it
will default to use the MAX Backup ET from Setup.
Using ET
ET is the position that you select when you want to view the current
ET.
ET.
To do this:
1.
Turn the Function Selector dial to “ET.”
2.
Turn the Upper Level dial until you see:
This is the current Daily ET stored in the controller. The lower
line shows the date and time the ET was received by the
controller.
line shows the date and time the ET was received by the
controller.
3.
Turn the Upper Level dial until you see:
Kc is a mathematical notation for Landscape Coefficient. This is
an adjustment factor for each station based on the plant type that
is being irrigated. For example, native plants use less water than
most non-native plants and will have a lower Kc.
an adjustment factor for each station based on the plant type that
is being irrigated. For example, native plants use less water than
most non-native plants and will have a lower Kc.
CURRENT WEEKLY ET: 0.95
11-28-02 00:09:24
CURRENT DAILY ET: 0.14
11-28-02 00:09:24
COMMUNICATION STATUS
COMMUNICATION LOST
STATUS: WARNING SEE ALERT
Using Special Features
73
Water Window Status Alert
This alert shows the total amount of used window (run time plus idle
soak time) and shows the amount that this exceeds the Set window. If
the Run Time is under the window allotment, then there is not a
warning, but this screen still shows the time and amount it is under.
soak time) and shows the amount that this exceeds the Set window. If
the Run Time is under the window allotment, then there is not a
warning, but this screen still shows the time and amount it is under.
In this example, the allowed water window is 300 minutes. The +60
indicates that the calculated schedule is 60 minutes more than the
window is scheduled to complete.
indicates that the calculated schedule is 60 minutes more than the
window is scheduled to complete.
Water Day Status Alert (A)
This alert shows for Schedule A if the user defined Scheduled days
are fewer than the days that the scheduling engine determines are
required.
are fewer than the days that the scheduling engine determines are
required.
This alert also shows the actual day interval that the WeatherTRAK ET
plus Scheduling Engine suggests. This is done by using the MAX ET
Value for each time of year. If there is a violation for multiple months
it will show the earliest month first until the schedule for that month
is corrected. If there are multiple months in violation, then the next
month will only show up when the first month has been resolved.
plus Scheduling Engine suggests. This is done by using the MAX ET
Value for each time of year. If there is a violation for multiple months
it will show the earliest month first until the schedule for that month
is corrected. If there are multiple months in violation, then the next
month will only show up when the first month has been resolved.
DAY STATUS SCHEDULE A
Jul: 1 DAY INTERVAL REQ.
STATUS: WARNING SEE ALERT
MANUAL WINDOW STATUS
TIME: 300 MIN (+60)
STATUS: WARNING SEE ALERT
Using Special Features
72