KROHNE FMCW06G10 Manual De Usuario
START-UP
5
29
OPTIWAVE 1010
www.krohne.com
09/2014 - 4003537401 - MA OPTIWAVE 1010 R01 en
Installation procedure
1 Install Microsoft® .NET Framework 1.1.
2 Install PACTware™ 4.0 or later version.
3 Install the OPTIWAVE 1010 DTM on your workstation or your portable computer. Follow the
2 Install PACTware™ 4.0 or later version.
3 Install the OPTIWAVE 1010 DTM on your workstation or your portable computer. Follow the
instructions in the Installation wizard.
4 Plug the HART modem into your computer (Serial or USB HART® modem). If you are using a
USB® HART modem, you must install the Driver for the USB HART® modem first. Make sure
that the location of the port for the HART® modem is clearly identified.
that the location of the port for the HART® modem is clearly identified.
5 Start the PACTware™ program.
i
End of the procedure.
5.4 Remote communication with the AMS™ Device Manager
The AMS™ Device Manager is an industrial Plant Asset Management (PAM) software tool. Its
role is to:
role is to:
• Store configuration information for each device.
• Support HART® devices.
• Store and read process data.
• Store and read diagnostic status information.
• Help plan preventive maintenance to reduce a plant's downtime to a minimum.
• Support HART® devices.
• Store and read process data.
• Store and read diagnostic status information.
• Help plan preventive maintenance to reduce a plant's downtime to a minimum.
The DD file is given on the DVD-ROM supplied with the device. You can also download it from our
website.
website.