Hewlett Packard Enterprise Company ARUBA70 Manual De Usuario
AP Deployment
29
Chapter 3
Using the Built-In Mounting Slots
The keyhole-shaped slots on the back of the Aruba 70 can be used to attach the device upright
to an indoor wall or shelf.
to an indoor wall or shelf.
To hang the Aruba 70 upright using the mounting slots, perform the following steps.
1
Install two screws in the wall or shelf as shown in
F
IGURE
3-2 Mounting Screw Specifications
If attaching the device to drywall, we recommend using appropriate wall anchors (not
included) as shown in
included) as shown in
Figure 3-3
on
page 30
.
C
AUTION
—
Do not use the mounting slots to hang the Aruba 70 from the
ceiling, sideways, or in any place where it could fall on people or equipment.
For more secure installation, use one of the optional mounting kits.
For more secure installation, use one of the optional mounting kits.
Screw/Nail Positions
(fastened to wall or shelf)
12.7 cm
(5.00")
0.12"
0.27"
0.23"
0.05"
clearance
from surface
3.0
mm
5.8
mm
0.08"
0.15"
0.15"
clearance
from surface
2.0
mm
3.8
mm
clearance
from surface
1.3
mm
clearnace
from surface
7.0
mm
Maximum
Minimum
Screw/Nail Dimensions