Redline Communications Inc. AN100UXA Manual De Usuario
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 97 of 136
April 19, 2010
Table 43: CLI - Show Command
Command
Parameter/Description
SignalNoise:..................29.6 dB
IpAddress:....................192.168.20.30
SignalNoiseMax:...............31.1 dB
BasicCid:.....................47
SignalNoiseMin:...............23.2 dB
DownChannelModCode:...........64QAM(3/4)(6)
CrcErr:.......................0
SsInfDownlinkRate:............12705 Kbps
AntennaRsl:...................-54 dBm
UpChannelModCode:.............64QAM(3/4)(6)
Distance:.....................0 m
SsInfUplinkRate:..............12705 Kbps
status
Display Wireless Interface information.
AN100UX(show->)$> status
Structure --- <<Wireless Interface Status>>
Downlink Status Uplink Status
------------------------------------- -------------------------------
Traffic:.......................0 kbps Traffic:.................0 kbps
BandwidthMargin:...........13824 kbps BandwidthMargin:......3110 kbps
ActiveSfs:.....................0 ActiveSfs:...............0
SmcRate:.......................0 kbps SmcRate:.................0 kbps
BwUsage:.......................0 % BwUsage:.................0 %
Others
-------------------------------------
Cinr:........................3.0 dB
RfTxPower:....................20 dBm
IduTemp:...................41 Celsius
OduTemp:...................33 Celsius
HcsErrors:.....................0
CrcErrors:.....................0
AirInterfaceStatus:...enabled(1)
ScSynchroStatus:....noSynchro(0)
RegisteredSSs:.................0
ReferenceRss:................-70 dBm
PowerSupplyStatus:......AB-On(3)
FansStatus:..............main(1)
NarrowestSubchannel:1/2-Subch(1)
Structure --- <<Wireless Interface Status>>
Downlink Status Uplink Status
------------------------------------- -------------------------------
Traffic:.......................0 kbps Traffic:.................0 kbps
BandwidthMargin:...........13824 kbps BandwidthMargin:......3110 kbps
ActiveSfs:.....................0 ActiveSfs:...............0
SmcRate:.......................0 kbps SmcRate:.................0 kbps
BwUsage:.......................0 % BwUsage:.................0 %
Others
-------------------------------------
Cinr:........................3.0 dB
RfTxPower:....................20 dBm
IduTemp:...................41 Celsius
OduTemp:...................33 Celsius
HcsErrors:.....................0
CrcErrors:.....................0
AirInterfaceStatus:...enabled(1)
ScSynchroStatus:....noSynchro(0)
RegisteredSSs:.................0
ReferenceRss:................-70 dBm
PowerSupplyStatus:......AB-On(3)
FansStatus:..............main(1)
NarrowestSubchannel:1/2-Subch(1)
sysContact
Display contact info of system administrator.
sysDescr
Display info about system hardware and software.
sysLocation
Display system location information.
sysName
Display system name.
sysUpTime
Display system time running since last reboot.
version
Display the running software version.
5.2.10 snmpAccCtrl
Use the snmpAccCtrl command to enable access for SNMP managers. All SNMP
managers are identified by IP address, port, and community read and write names
(strings) and can be individually added and removed from the list.
managers are identified by IP address, port, and community read and write names
(strings) and can be individually added and removed from the list.
Table 44: CLI - snmpAccCtrl
snmpAccCtrl <add> <alias> <delete> <edit> <show>
Configure SNMP account access settings.
add <Entryindex> <ReadCommunity> <WriteCommunity> <ManagerIpAddress>
Create a new SNMP trap. The index value is assigned automatically. Up to eight settings
may be entered.