VESSCO inc TX-300F Manual De Usuario
4
System Function
A. STORING PHONE NUMBER
SECUMAN will automatically dial up to 9 telephone numbers and pager
numbers and deliver one of two different messages when triggered by an
numbers and deliver one of two different messages when triggered by an
alarm system.
Each of nine numbers can be programmed for up to 32digits (including
pound tones and pauses used in pager numbers). The unit will
automatically skip any blank numbers.
To program telephone
To program telephone
1. Turn the power switch “ON”. The LCD of the SECUMAN will
indicate which mode the unit is in (OFF or OPERATE Mode).
2. To change mode, press MODE button (OFF Mode → TEST Mode
→ OPERATE Mode → OFF Mode). In the OFF mode, press the
“ME” button over 2 seconds to select the PROGRAM mode.
3. Continue programming per the following sections.
To store telephone numbers
4. Insert PASS NUMBER (Default “0000”) and press # button.
5. Press all of the digits of first phone number. The LCD will display
5. Press all of the digits of first phone number. The LCD will display
every number is pressed
6. Momentarily press M E (MEMORY) Button after the entire phone
number has been entered, then press the “1”key. This number is
now stored in memory location 1.
now stored in memory location 1.
7. For memory 2, press all the digits for the second phone number.
Momentarily press M E (MEMORY) Button after the entire phone
number has been entered, then press the “2” key. This number is
now stored in memory location 2.
now stored in memory location 2.
8. Repeat this process for memory location 3, 4, 5, 6, 7, 8 and 9, if
you need.