ConnecteDevice Limited BTG2 Manual De Usuario
PAGE 2 / 7
Bluetrek® G2 is a qualified Bluetooth ® headset that complies with the Bluetooth ®
1.1 protocol. It supports two profiles: Headset Profiles and Hands-free profile.
It will work with any qualified Bluetooth® device that supports the Headset profile or
the Hands-free profile.
To check the list of qualified Bluetooth® mobile phones working with Bluetrek® G2,
please consult: www.bluetrek.com
Bluetrek® G2 headset can be used with:
1.1 protocol. It supports two profiles: Headset Profiles and Hands-free profile.
It will work with any qualified Bluetooth® device that supports the Headset profile or
the Hands-free profile.
To check the list of qualified Bluetooth® mobile phones working with Bluetrek® G2,
please consult: www.bluetrek.com
Bluetrek® G2 headset can be used with:
- a qualified Bluetooth® mobile phone (*);
- A non-Bluetooth® mobile phone (*) connected to the Bluetooth® adaptor BT07
- A non-Bluetooth® mobile phone (*) connected to the Bluetooth® adaptor BT07
(optional);
(*) or another Bluetooth device supporting the Headset or Hands-free profile. This
user guide is focusing on the use of this Bluetooth® headset with a Bluetooth®
mobile phone, which is the most common application.
Your Bluetrek® G2 will allow you to take a call, initiate a call (if your phone has voice
controls), and adjust volume directly on your headset, without the need to touch your
mobile phone.
The Bluetrek® G2 headset has 5 buttons:
• “TALK “Button (central button),
• 2 “VOL+ “buttons,
• 2 “VOL- “buttons.
Please refer to the picture on page 2.
Before using Bluetrek® G2 headset, you must:
. Charge the headset; please refer to the “Charging Bluetrek® G2” section of this
user guide.
. Pair the headset with a mobile phone. Please refer to the “Pairing Bluetrek® G2”
section of this manual.
Before using Bluetrek® G2 headset, you must:
. Charge the headset; please refer to the “Charging Bluetrek® G2” section of this
user guide.
. Pair the headset with a mobile phone. Please refer to the “Pairing Bluetrek® G2”
section of this manual.
1. Charging Bluetrek® G2
Your headset is delivered uncharged. So before the first use, you must fully recharge
it for about 2 hours with the supplied charger, until the blue indicator light turns on.
The use of any other charger will automatically suspend the warranty. During
subsequent charges, the charging should take approximately 1 hour 45 minutes.
Please connect the charger to the headset and to the mains. During the charge, the
indicator light is either red if your headset battery was excessively discharged, or
purple during a normal charge. The indicator light will turn to blue when the charge is
complete.
When you hear a light beep in your headset at regular intervals, and the indicator
light flashes in red, your headset needs to be recharged.
it for about 2 hours with the supplied charger, until the blue indicator light turns on.
The use of any other charger will automatically suspend the warranty. During
subsequent charges, the charging should take approximately 1 hour 45 minutes.
Please connect the charger to the headset and to the mains. During the charge, the
indicator light is either red if your headset battery was excessively discharged, or
purple during a normal charge. The indicator light will turn to blue when the charge is
complete.
When you hear a light beep in your headset at regular intervals, and the indicator
light flashes in red, your headset needs to be recharged.