Getac Technology Corporation 8265NG Manual De Usuario

 

50

 

The Security menu contains the security settings, which safeguard your 
system against unauthorized use. 

 

You can set the user password only when the supervisor password has 
been set. 

 

If both the supervisor and user passwords are set, you can enter any of 

them for starting up the system and/or entering BIOS Setup. However, 
the user password only allows you to view/change the settings of certain 

items. 

 

A password setting is applied right after it is confirmed. To cancel a 
password, leave the password empty by pressing the Enter key. 

 
 

Set Supervisor/User Password sets the supervisor/user password. You can 

set the supervisor/user password to be required for starting up the 
system and/or entering BIOS Setup. 

 

Strong Password enables or disables strong password. When enabled, 

the password you set must contain at least one upper-case letter, one 
lower-case letter, and one digit. 

 

Password Configuration sets the minimum password length. Enter the 

number in the input field and select [Yes]. The number should be 
between 4 and 64. 

 

Password on Boot allows you to enable or disable the entering of 
password for booting up your system. 

 

Set HDD 0 User Password sets the password for locking the Primary 
Master hard disk drive. After setting a password, the hard disk drive can 

only be unlocked by the password no matter where it is installed. 

 

Security Freeze Lock enables or disables the “Security Freeze Lock” 
function. This function is only applicable to SATA drives in AHCI mode. It 

prevents attacks on the SATA drive by freezing the security state of the 
drive at POST and also when the system resumes from S3. 

 

TPM Setup Menu  

TPM Support enables or disables TPM (Trusted Platform Module) support. 
TPM (Trusted Platform Module) is a component on your computer’s 

mainboard that is specifically designed to enhance platform security by