Getac Technology Corporation 8265NG 用户手册
50
Security Menu
The Security menu contains the security settings, which safeguard your
system against unauthorized use.
system against unauthorized use.
NOTE:
You can set the user password only when the supervisor password has
been set.
been set.
If both the supervisor and user passwords are set, you can enter any of
them for starting up the system and/or entering BIOS Setup. However,
the user password only allows you to view/change the settings of certain
the user password only allows you to view/change the settings of certain
items.
A password setting is applied right after it is confirmed. To cancel a
password, leave the password empty by pressing the Enter key.
password, leave the password empty by pressing the Enter key.
Set Supervisor/User Password sets the supervisor/user password. You can
set the supervisor/user password to be required for starting up the
system and/or entering BIOS Setup.
system and/or entering BIOS Setup.
Strong Password enables or disables strong password. When enabled,
the password you set must contain at least one upper-case letter, one
lower-case letter, and one digit.
lower-case letter, and one digit.
Password Configuration sets the minimum password length. Enter the
number in the input field and select [Yes]. The number should be
between 4 and 64.
between 4 and 64.
Password on Boot allows you to enable or disable the entering of
password for booting up your system.
password for booting up your system.
Set HDD 0 User Password sets the password for locking the Primary
Master hard disk drive. After setting a password, the hard disk drive can
Master hard disk drive. After setting a password, the hard disk drive can
only be unlocked by the password no matter where it is installed.
Security Freeze Lock enables or disables the “Security Freeze Lock”
function. This function is only applicable to SATA drives in AHCI mode. It
function. This function is only applicable to SATA drives in AHCI mode. It
prevents attacks on the SATA drive by freezing the security state of the
drive at POST and also when the system resumes from S3.
drive at POST and also when the system resumes from S3.
TPM Setup Menu
TPM Support enables or disables TPM (Trusted Platform Module) support.
TPM (Trusted Platform Module) is a component on your computer’s
TPM (Trusted Platform Module) is a component on your computer’s
mainboard that is specifically designed to enhance platform security by