Getac Technology Corporation V110GD Manual De Usuario
PIC32MX1XX/2XX
DS61168C-page 308
Preliminary
© 2011 Microchip Technology Inc.
Added Memory Maps for the new devices (see
Removed the BMXCHEDMA bit from the Bus Matrix Register map (see
).
Added the REFOTRIM register, added the DIVSWEN bit to the REFOCON
registers, added Note 4 to the ULOCK and SOSCEN bits and added the
PBDIVRDY bit in the OSCCON register in the in the System Control Register
map (see
registers, added Note 4 to the ULOCK and SOSCEN bits and added the
PBDIVRDY bit in the OSCCON register in the in the System Control Register
map (see
Removed the ALTI2C1 and ALTI2C2 bits from the DEVCFG3 register and
added Note 1 to the UPLLEN and UPLLIDIV<2:0> bits of the DEVCFG2
register in the Device Configuration Word Summary (see
added Note 1 to the UPLLEN and UPLLIDIV<2:0> bits of the DEVCFG2
register in the Device Configuration Word Summary (see
).
Updated Note 1 in the Device and Revision ID Summary (see
).
Added the ANSB6 and ANSB12 bits to the ANSELB register in the PORTB
Register map (see
Register map (see
).
Updated all register names in the Peripheral Pin Select Register map (see
Added values in support of new devices (16 KB RAM and 32 KB RAM) in the
Data RAM Size register (see
Data RAM Size register (see
Added values in support of new devices (64 KB Flash and 128 KB Flash) in
the Data RAM Size register (see
the Data RAM Size register (see
).
Added Note 5 to the PIC32MX1XX/2XX Family Clock Diagram (see
).
Added the PBDIVRDY bit and Note 2 to the Oscillator Control register (see
).
Added the DIVSWEN bit and Note 3 to the Reference Oscillator Control
register (see
register (see
).
Added the REFOTRIM register (see
).
).
).
Added Note 3 to the CTMU Control register (see
Added Note 1 and the PGEC4/PGED4 pin pair to the ICESEL<1:0> bits in
(see
).
Removed the ALTI2C1 and ALTI2C2 bits from the Device Configuration
Word 3 register (see
Word 3 register (see
).
Removed 26.3.3 “Power-up Requirements”.
Added Note 3 to the Connections for the On-Chip Regulator diagram (see
).
Updated the Block Diagram of Programming, Debugging and Trace Ports
diagram (see
diagram (see
).
TABLE A-1:
MAJOR SECTION UPDATES (CONTINUED)
Section Name
Update Description