FreeWave Technologies Inc. PRW1001ER Manual De Usuario

Descargar
Página de 172
WavePoint 10e
Configuring the WAN in an IPv4 Network
WavePoint 10e
has two WAN ports that can be configured to have separate settings. Use the
settings on the WAN IPv4 pages to define the properties for each WAN port.
Defining WAN Connections Using Static IP Addresses
Assign a static IP address to the
WavePoint 10e
for WAN traffic.
Procedure
1. Connect to the
WavePoint 10e
either through an Ethernet cable connected to Ethernet
port 3 or 4 or through the computer's wireless options.
2. Use a web browser to access the Configuration pages.
3. On the Network menu, click WAN > WAN1 IPv4 Setup or WAN 2 IPv4 Setup.
4. In the Connection Type field, click Static.
5. In the Static IP section, enter this information for the static WAN connection:
a. IP Address - Enter the static IP address assigned by the ISP.
This address identifies the device to the ISP.
b. Subnet Mask - Enter the IPv4 Subnet Mask provided by the ISP or Network
Administrator.
c. Gateway IP Address - Enter the IP address of the ISP Gateway provided by
the ISP or Network Administrator.
6. In the Domain Name System (DNS) Servers section, enter the IP address of the
Primary and Secondary DNS servers.
A DNS server translates Internet names to numeric IP addresses.
Note: If the ISP does not transfer the IP address, obtain the address from them
and enter it manually into these fields.
7. In the MAC Address section, select the method the ISP uses to determine the local
Ethernet address of this WAN port:
l
Use Default MAC - Select this option unless the ISP requires MAC authentication
and another MAC address has been previously registered with the ISP.
l
Clone your PC's MAC - Select this option to assign the MAC address of the
computer used to configure the
WavePoint 10e
.
l
Use this MAC - Select this option if the ISP assigned a MAC address to use.
LUM0063AA Rev 05/05/2014
Page 43 of 171
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.