Cisco Systems 102053 Manual De Usuario

C I S C O C O N F I D E N T I A L - D r a f t 2

4-2

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

OL-4310-03

Chapter 4 Using the Web-Browser Interface

Using the Web-Browser Interface for the First Time

Use the access point’s IP address to browse to the management system. See the

“Obtaining and

Assigning an IP Address” section on page 3-3

for instructions on assigning an IP address to the access

point.

Follow these steps to begin using the web-browser interface:

Step 1

Start the browser.

Step 2

Enter the access point’s IP address in the browser Location field (Netscape Communicator) or Address
field (Internet Explorer) and press Enter. The Summary Status page appears.

Using the Management Pages in the Web-Browser Interface

The system management pages use consistent techniques to present and save configuration information.
A navigation bar is on the left side of the page, and configuration action buttons appear at the bottom.
You use the navigation bar to browse to other management pages, and you use the configuration action
buttons to save or cancel changes to the configuration.

Note

Changes are applied only when you click Apply. It’s important to remember that clicking your browser’s
Back button returns you to the previous page without saving any changes you have made. Clicking
Cancel cancels any changes you made on the page and keeps you on that page.

Figure 4-1

shows the web-browser interface home page.