Cisco Systems 102053 Manual De Usuario
C I S C O C O N F I D E N T I A L - D r a f t 2
7-5
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-03
Chapter 7 2.4-GHz Radio Upgrade
Removing a 2.4-GHz Radio
Step 3
Remove the antenna wires from the blank spacer card.
Caution
To avoid damaging the antenna wire assemblies, handle them by their connectors.
Step 4
Remove the blank spacer card from the mini-PCI connector.
For instructions on installing the radio card, go to the
section.
Removing a 2.4-GHz Radio
To remove a 2.4-GHz radio card from your access point, follow these steps:
Caution
The internal access point components and the 2.4-GHz radio can be damaged by ESD from improper
handling.
handling.
Step 1
Use your fingers to carefully remove the antenna wire connectors from the 2.4-GHz radio card.
Caution
The antenna connectors can be damaged by using a pair of long-nose pliers during the removal
process.
process.
Caution
To avoid damaging the antenna wire assemblies, handle them by their connectors.