Cisco Systems 102053 Manual De Usuario

C I S C O C O N F I D E N T I A L - D r a f t 2

7-7

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

OL-4310-03

Chapter 7 2.4-GHz Radio Upgrade

Installing a 2.4-GHz Radio

To install a new 2.4-GHz radio card into the access point, follow these steps:

Caution

The internal access point components and the 2.4-GHz radio can be damaged by ESD from improper
handling.

Step 1

Carefully remove the Cisco Aironet 2.4-GHz radio card from its anti-static bag.

Step 2

Grasp the radio card only on the edges, being careful not to touch components on the board or the gold
connector pins.

Step 3

Connect the black antenna wire connector to the radio card antenna connector marked by the black label
(see

Caution

To avoid damaging the antenna wire assemblies, handle them by their connectors.

Figure 7-4

Antenna Connector Labels and Mini-PCI Connector

Step 4

Connect the white antenna wire connector to the radio card antenna connector marked by the white label
(see

MAIN

74251

Antenna connector (black wire)

Mini-PCI connector

Antenna connector (white wire)