Cisco Systems 102053 Manual De Usuario
C I S C O C O N F I D E N T I A L - D r a f t 2
8-8
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-03
Chapter 8 5-GHz Radio Module Upgrade
Finding the Software Version
The 5-GHz radio module installation is now complete and radio settings are at default values. To
configure the 5-GHz radio with your wireless network settings refer to the Cisco IOS Software
Configuration Guide for Cisco Aironet Access Points.
configure the 5-GHz radio with your wireless network settings refer to the Cisco IOS Software
Configuration Guide for Cisco Aironet Access Points.
Finding the Software Version
To find the version of IOS software running on your access point, use a Telnet session to log into the
access point and enter the show version EXEC command. This example shows command output from
an access point running Cisco IOS Release 12.2(11)JA:
access point and enter the show version EXEC command. This example shows command output from
an access point running Cisco IOS Release 12.2(11)JA:
ap1200>show version
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(11)JA
Copyright (c) 1986-2003 by Cisco Systems, Inc.
On access points running IOS software, you can also find the software version on the System Software
page in the access point's web-browser interface.
page in the access point's web-browser interface.
If your access point does not run IOS software, the software version appears at the top left of most pages
in the web-browser interface.
in the web-browser interface.