Gemtek Technology Co. Ltd. AP931229AG Manual De Usuario
BROWAN COMMUNICATIONS
Page
22
This chapter contains web management reference information.
The web management main menu consists of the following sub menus:
Status – device status showing
Network – device settings affecting networking
Wireless – device settings related to the wireless part of the BW2250
System – device system settings directly applicable to the BW2250
Exit – click exit and leave the web management then close your web-browser window.
Network – device settings affecting networking
Wireless – device settings related to the wireless part of the BW2250
System – device system settings directly applicable to the BW2250
Exit – click exit and leave the web management then close your web-browser window.
Web Interface
The main web management menu is displayed at the top of the page after successfully logging into
the system (see the figure below). From this menu all essential configuration pages are accessed.
the system (see the figure below). From this menu all essential configuration pages are accessed.
Figure 10 – Main Configuration Management Menu
The web management menu has the following structure:
Status
Device Status – show the status related with the whole device
Wireless Status – show the status of the two radios
Interface Statistics – show the status of each network interface
Network
Interface – TCP/IP settings of BW2250 LAN (Bridge) port
RADIUS Server – specify the settings of RADIUS server which is used by 802.1x or WPA
DHCP Settings– specify the settings of DHCP server or DHCP relay service
NTP Settings – NTP settings of BW2250
Time Settings – Manually set time
Wireless
Basic
– specify the basic settings related with wireless part
Advance
– specify the settings of multiple BSSID or Bridge
WEP – specify the WEP settings related with static WEP encryption
MAC ACL – MAC ACL settings for BW2250
System
Security
–
set access permission to your BW2250
SNMP
–
SNMP service
Telnet
–
Telnet/SSH service
Configuration
– system configuration utilities, including Backup/Upload configuration
Chapter 4 – Reference Manual