Bendix Commercial Vehicle Systems LLC TX433TS-2 Manual De Usuario

 
SmarTire Systems Inc.  
Tire Monitoring System Reference Manual

 

 

 

 6/13/2000     Page 31 of 55 

 

  

 
 
After a tire rotation the receiver needs to be reconfigured to accept 
existing tire ID numbers from the new locations.  The color code on 
the transmitter and valve correspond to a sensor number. 
 

 
 

 

 

To choose this mode press the TIRE button when the tire 
rotation icon is displayed 
 
The tire outline indicates the installed sensors.  The selected 
tire location is filled-in.  Use the TIRE button to scroll to the 
desired tire location.   
 

 

 

Press the MODE button to select it for editing.  A number 
representing each sensor is shown (e.g. a 2 corresponds to 
sensor #2).  Press the TIRE or MODE button to increase or 
decrease the value respectively.   

 

Press the SET button when the number representing the 
desired sensor is achieved.  This returns the display to the tire 
selection menu.  Scroll to a different tire location and edit the 
sensor numbers.  When all the changes are done, press the 
SET button to save and exit this mode. 
 

  

 

 
(ID 1 programmed in two 
locations) 

If more than one tire location contain the same sensor number, 
the display will prompt an error with the conflicting tires 
filled in and the associated sensor number. 
 
Press SET to return the tire selection menu and make 
necessary corrections. 
 

 
 NOTE: 
After removing a sensor from the system using the Learn mode (see Diagnostic Modes below), 
the sensor numbers may be changed.