Given Imaging Limited SMARTPILL Manual De Usuario

Fully charge the data receiver the day or night before starting a test. Charging can take 

up to 5 hours. 

Charging the Data Receiver 
1. Ensure that the data receiver is off. If any characters appear on the display, turn off 

the data receiver by simultaneously pressing the 2 buttons on the front of the unit 
for approximately 5 seconds. 

The data receiver must be turned off during charging.  Charging the data receiver while turned on results in a 

partial charge. You may lose test data. 

2. When the back light dims, release both buttons. 
3. Plug the docking station into an electrical outlet.  

►

If necessary, use a power adapter. 

4. Firmly push the data receiver into the docking station to initiate charging. The 

docking station’s LED turns red. 

 

x Allow up to 5 hours for the data receiver to fully charge. 
x The docking station’s LED turns green when the data receiver is fully charged. 

Charging or recharging the data receiver with a power source other than the SmartPill power supply may 

permanently damage the data receiver, docking station, or system computer and will void the product 

warranty.