Cam Lite Electronics Inc FC2000TX Manual De Usuario
!
"
3
Operation
The transmitter provides no controls to the end user. It operates at a fixed frequency that
is set at the factory. It begins transmitting as soon as 12 VDC is applied to the unit. The
red wire may be connected to the 12 VDC power source through a switch that can be
used to turn the unit on or off at will.
is set at the factory. It begins transmitting as soon as 12 VDC is applied to the unit. The
red wire may be connected to the 12 VDC power source through a switch that can be
used to turn the unit on or off at will.
Transmitter performance can be effected by metal surfaces near the antenna and by large
physical structures. The transmitter should not be operated near medical equipment. The
operator may assume that any restrictions to the use of cell phones also applies to the use
of this transmitter.
physical structures. The transmitter should not be operated near medical equipment. The
operator may assume that any restrictions to the use of cell phones also applies to the use
of this transmitter.
The transmitter complies with Part 15 of the FCC rules. Operation is subject to the
restriction that the device does not cause harmful interference.
restriction that the device does not cause harmful interference.