Honeywell International Inc. 950003 Manual De Usuario

3. Select  the desired option for connecting to the desktop computer (‘115200’ default).  Click OK.

4. Place the Dolphin in the cradle.

5. The Dolphin 9500/9550 will automatically attempt to start an ActiveSync connection with the desktop computer,

Note: ActiveSync must be installed and configured properly on the desktop computer in order for an ActiveSync communication 

connection to the Dolphin 9500/9550 to be successful.

To configure the Dolphin 9500/9550 terminal for communications, see  

To use the USB HomeBase, you need the following equipment:

•

HomeBase with power supply

•

USB  Cable

•

CD with USB drivers

•

Windows® 98, Windows® Me, Windows® 2000, or Windows® XP computer.

Note: The USB HomeBase does not support Windows NT®  

To install the HomeBase, follow these steps:

1. Plug in the power supply and connect it to the back of the HomeBase.  

2. Plug the USB cable into the back of the HomeBase.

3. Plug the other end of the USB cable into your PC.

At this point, a dialog box appears on your PC instructing you that the system has detected new hardware and it is searching for 
the HHP USB-IrDA driver.  Unless you have previously installed the USB HomeBase, the OS will be unable to find one and the 
Found New Hardware Wizard screen shown below will display on your PC’s screen.  

Desk top Computer ActiveSync Connection Settings