Honeywell International Inc. 950003 Manual De Usuario

To configure the Dolphin 9500/9550 terminal for communications, see 

To communicate with the Dolphin and any other devices connected to the Dolphin Charging/Communication cradle:

1. Insert the Dolphin into the terminal well of the HomeBase.  If the Dolphin is in sleep mode, it will awaken into active state.

2. The DOCK LED on the cradle will illuminate.  If the Dolphin does not turn on, or the LED does not light up, make sure that it 

is properly seated in the terminal well and that the power supply is properly connected to the cradle and plugged into a 
functioning AC outlet.

3. The Dolphin 9500/9550 terminal will automatically open ActiveSync to establish a connection.  Data can then be transferred 

between the terminal and the devices connected to the Dolphin cradle.  

When data transfer begins, the COMM LED on the cradle will blink red and green for an RS-232 connection or solid green for a 
USB connection.  If the HomeBase will not  communicate with the Dolphin, check the port connections to ensure that the cradle 
is correctly configured.  

ActiveSync Connection Settings