Gemlink Ltd. 3735MVBT Manual De Usuario
8
Customer Support: 1-888-999-4215
9
using the Stereo Rca Inputs - Rear View
using the optical Input - Rear View
using the Line In - Side View
Audio Inputs
using the Stereo Rca Inputs...
When connecting two products using an RCA Cable, match the colored ports with the same colored connection.
1. Connect the RCA Cable to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs
on the television.
2. Press the Power button to power on the unit.
3. Press the Source button repeatedly to enter auX Mode, indicated by a white light.
4. Audio played through the television will now be heard through the speakers.
using the Line In
3.5 mm audio input cable not included.
1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit. and plug the other end of the cable
into the audio output/headphone output on an MP3 Player or other audio source.
2. Press the Power button to power the unit on.
3. Press the Source button repeatedly to enter Line In Mode, indicated by a green light.
4. Audio played through the connected device will now be heard through the speakers.
using the optical Input
You will need: An audio source with an Optical Audio Output and a Digital Optical Audio Cable (not included)
1. Connect the Digital Optical Audio Cable to the optical output on the audio source and to the Optical Input
on the speaker bar.
2. Press the Power button to power the unit on.
3. Press the Source button repeatedly to switch to SPDIF Mode, indicated by a amber light.
4. Using the native controls on your connected device, make sure the audio settings are set to PcM or optical
audio and are turned On.
5. Audio from the connected audio source will now be played through the speakers.
Important tips for optical audio:
Use the correct toslink cable and make sure that it is firmly seated in both source and sound bar sockets.
Use the correct toslink cable and make sure that it is firmly seated in both source and sound bar sockets.
Optical output is activated on the source (they should see a red light emitting from the toslink socket).
It may be labeled SPDIF in the setting menu of the source.
It may be labeled SPDIF in the setting menu of the source.
The optical output is set to output PCM and not Dolby Digital.
and the Subwoofer output
1. Use an RCA cable to connect an external subwoofer to the Subwoofer output.
2. When audio is played through any source, the speaker will automatically use the connected subwoofer.