Gemlink Ltd. 3735MVBT Manual De Usuario
10
Customer Support: 1-888-999-4215
11
Pairing a Bluetooth Device for the First time
1. Power on the unit by pressing the Power button.
2. Press the button on the remote to switch to Bluetooth Mode., indicated by a slowly flashing blue light.
3. Press and hold the Pair button on the side of the unit.
The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the ItB404 in your Bluetooth settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator will
display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.
device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.
Playing audio Wirelessly
1. After pairing to a bluetooth device, use the native controls on the connected Bluetooth Device to
select a track.
2. Play, pause or skip a selected track using the native controls on the connected Bluetooth Device.
3. Audio played through the connected Bluetooth device will now be heard through the speakers.
Bluetooth
Learn Feature
What Is the Learn Feature?
The Learn feature captures remote commands from your television remote, and teaches your bar speaker to
operate when these commands are pressed. Power, volume and mute are a few examples of commands that the
bar speaker can learn.
operate when these commands are pressed. Power, volume and mute are a few examples of commands that the
bar speaker can learn.
Why use the Learn Feature?
Teaching the bar speaker remote commands will reduce the number of remotes needed, save time searching for
remote codes, and improve the ease of operation.
remote codes, and improve the ease of operation.
Note: Not all functions of the sound bar will be available through your own remote control, such as bass and treble.
Use the included remote for these functions. While ITB404B is able to learn most IR protocols, not all can be programmed.
Use the included remote for these functions. While ITB404B is able to learn most IR protocols, not all can be programmed.
using the Learn Feature
1. With the power Off, press the Learn button on the unit. An indicator will flicker red.
2. Press the button you desire to be learned on the included remote.
For example: Volume +
3. The red light will continue to flicker, and another indicator will display a blue light.
4. Press the corresponding button on your remote.
5. The red light will continue to flicker, and another indicator will display a green light.
6. Press the Learn button on the unit.
7. The programmed button on your remote will now be able to control your sound bar.
Note: It is necessary to program each button i.e. channel and volume + and - separately.
8. To start over, press and hold the learn key for over 3 seconds. If the sound bar has failed to learn a command,
all the LED indicators will display a light for two seconds to signal the learning function has been reset.