Xmark Corporation APC Manual De Usuario

Compact eLink Reader 

 

 

981-000037-000 

eXI Wireless Systems 

15 

July 2003 

  

Revision 

1.0 

 

3. Enter password slot number (1 or 2) 

4. Press ‘ENTER’ key 

5. Press ‘CLEAR’ key 

 

After this the keypad Bypass light will flash 3 times and Controller buzzer will 

beep 1 long beep indicate that one of the User passwords is deleted by both, the 

Keypad and the Controller. 

 

There are three modes of operation available to the user or installer.   

 

 

 

To change the operation mode: 

 

1. Enter Master Password 

2. Press ‘ENTER’ key 

3. Enter code for mode of operation: 

•  “51”   Test Mode 

•  “52”  Normal Mode with Fixed Alarm Duration 

•  “53”  Normal Mode with Unlimited Alarm Duration 

4. Press ‘ENTER’ key 

 

When the code is entered, the Controller will beep a distinctive number times for 

each different mode:  

 

•  Once for Test Mode 

•  Twice for Fixed Alarm Duration Mode and 

•  Three times for Unlimited Alarm Duration 

 

In this mode the system does not generate any alarms. This mode is used to 

setup the field strength and position the controller properly. When a tag is in the 

field the controller will beep briefly.  Test mode will terminate after 30 seconds if 

the controller does not detect a tag in the field. 

 

This is default operational mode in which the alarm will terminate after 20 sec-

onds the tag is out of the field. 

 

In this mode the alarm will not end until the password is entered (system by-

passed).

 

 

A 10 pin connector is provided for additional functions: