Xmark Corporation APC Manual De Usuario

Compact eLink Reader 

 

 

981-000037-000 

eXI Wireless Systems 

14 

July 2003 

  

Revision 

1.0 

 

The  Wireless Keypad is powered by a lithium battery at 3V / 220 mAH.  The 

battery is designed to last for at least 5 years with average of 100 keypad entries 

per day.  

When the battery is low on the keypad the “Battery Low” RED light will flash once 

every  6 seconds, and the Controller buzzer will give a low tone beep at the same 

time.  

The battery is easily replaceable by opening the enclosure from the front. 

There are two types of passwords: Master password and User password. Master 

password is used to assign or delete User password. User passwords are used to by-

pass the system.  

 

There is only one Master password and 2 user passwords. All passwords are 4 digit 

numbers.  

This password is used to change or delete User password or to change itself 

(Master password). 

To change Master Password: 

 

1. Enter existing Master password 

2. Press ‘ENTER’ key 

3. Enter existing Master password again 

4. Press ‘ENTER’ key 

5. Enter new 4 digit Master password (not less then 4 digits) 

6. Press ‘ENTER’ key 

7. After this the keypad Bypass light will flash 3 times and Controller buzzer 

will beep 4 times to         

    indicate  that  new  Master  password is accepted by both, the Keypad and 

the Controller. 

This password is used to bypass the system and to silence the alarms. 

 

To change/add User password: 

 

1. Enter Master Password 

2. Press ‘ENTER’ key 

3. Enter password slot number (1 or 2) 

4. Press ‘ENTER’ key 

5. Enter new 4 digit User password (not less then 4 digits) 

6. Press ‘ENTER’ key 

 

After this the keypad Bypass light will flash 3 times and Controller buzzer will 

beep 2 times to indicate that new User password is accepted by both, the Keypad 

and the Controller. 

 

 

1. Enter Master Password 

2. Press ‘ENTER’ key