Accton Technology 3CRWE454G72 Manual De Usuario
16
C
HAPTER
1: I
NTRODUCING
THE
A
CCESS
P
OINT
Rear Panel
The rear panel (
) of the Access Point contains one LAN port, a
reset button, a power adapter OK LED and a power adapter socket.
Figure 3 Access Point - Rear Panel
5 Wireless Antennae
The antennae on the product should be placed in a ‘V’ position when
initially installed.
initially installed.
CAUTION: Do not force the antennae round further than 90 degrees in
either direction.
either direction.
6 Power Adapter Socket
Only use the power adapter supplied with this Access Point. Do not use
any other adapter.
any other adapter.
7 Power Adapter OK LED
Green
Indicates that the power adapter is supplying Power to the Access Point.
If the LED is off, there may be a problem with the power adapter or
adapter cable.
If the LED is off, there may be a problem with the power adapter or
adapter cable.
8 Ethernet Port
Use the supplied patch cable to connect the Access Point to the LAN. The
port will automatically adjust to the correct speed and duplex.
port will automatically adjust to the correct speed and duplex.
9 Reset Button
This button allows you to reset the unit to factory defaults.
8
9
Ethernet
5
5
RESET
6
7
OK