Accton Technology 3CRWE454G72 Manual De Usuario

To power up the Access Point:

1 Plug the power adapter into the power adapter socket located on the 

back panel of the Access Point.

2 Plug the power adapter into a standard electrical wall socket.

The first step for installing your Access Point is to physically connect it to a 
switch or hub. See 

Figure 4   Connecting the Access Point

To use your Access Point to connect to the wireless LAN to the wired LAN:

1 Insert one end of the supplied Ethernet (RJ-45 Category 5) cable into the 

LAN port on the rear panel of the Access Point.

2 Insert the other end of the cable into the RJ-45 port on switch or hub. 

Check that the LAN status LED lights on the Access Point.

You have now completed the hardware installation of your Access Point. 
Next you need to set up your computers so that they connect to the 
Access Point.

Hub / Switch

Wireless 

users

3CR

WE4

1196

Aler

t