Accton Technology 3CRWE454G72 Manual De Usuario

Ensure that one of your computers has a copy of the new software image 
file stored on its hard disk or available on CD-ROM.

.

1 Remove power from the Access Point and connect the admin computer 

to the LAN port.

2 You will need to reconfigure this computer with the following static IP 

address information:

■

IP address: 192.168.1.2

■

Subnet mask: 255.255.255.0

■

Default Gateway address: 192.168.1.1

3 Restart the computer, and re-apply power to the Access Point.

4 Using the Web browser on the computer, enter the following URL in the 

location bar: 

. 

This will connect you to the Microcode Recovery utility in the Access 
Point.

5 Follow the on-screen instructions. Enter the path and filename of the 

software image file.

6 When the upload has completed, the Access Point will restart, run the 

self-test and, if successful, resume normal operation. The Alert LED will 
go out.

7 Reconnect your Access Point to your network. Do not forget to 

reconfigure the computer you used for the software upload.

If the Access Point does not resume normal operation following the 
upload, it may be faulty. Contact your supplier for advice.

See 

 on 

.