ZyXEL Communications Corporation EMG1302R10A Manual De Usuario
EMG1302-R10A User’s Guide
161
C
H A P T E R
2 2
Troubleshooting
22.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
problems are divided into the following categories.
•
•
•
•
•
22.2 Power, Hardware Connections, and LEDs
The EMG1302-R10A does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor or cord included with the EMG1302-R10A.
2
Make sure the power adaptor or cord is connected to the EMG1302-R10A and plugged in to an
appropriate power source. Make sure the power source is turned on.
appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adaptor or cord to the EMG1302-R10A.
4
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
.
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Disconnect and re-connect the power adaptor to the EMG1302-R10A.
5
If the problem continues, contact the vendor.