ZyXEL Communications Corporation G570SV2 Manual De Usuario

Chapter 7 Wireless Screens

ZyXEL G-570S

 v2 User’s Guide

Figure 41   OTIST

The following table describes the labels in this screen. 

Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the 
same Setup Key as your AP’s and click Save.

Figure 42   Example Wireless Client OTIST Screen

If you are using the ZyXEL Device in Wireless Client mode, you can enable OTIST using 
either the OTIST button or the web configurator.

Table 25   OTIST

One-Touch Intelligent Security Technology

Setup Key

Enter the setup key of up to eight printable characters. The default OTIST setup 
key is "01234567".

Note: If you change the OTIST setup key here, you must also make 

the same change on the wireless client(s).

Yes!

To have OTIST automatically generate a WPA-PSK key, select this check box. If 
you manually configured a WEP key or a WPA-PSK key and you also select this 
check box, then the key you manually configured is used.

Start

Click Start to encrypt the wireless security data using the setup key and have the 
device set the wireless client to use the same wireless settings as the device. You 
must also activate and start OTIST on the wireless client at the same time. 
The process takes three minutes to complete.