ZyXEL Communications Corporation IX280P Manual De Usuario
Chapter 9 The System Configuration Screens
MAX-207HW2R User’s Guide
91
Note: If you have a private WAN IP address, then you cannot use Dynamic DNS.
Click ADVANCED > System Configuration > Dynamic DNS to set up the MAX-
207HW2R as a dynamic DNS client.
207HW2R as a dynamic DNS client.
Figure 36 ADVANCED > System Configuration > Dynamic DNS
The following table describes the labels in this screen.
Table 32 ADVANCED > System Configuration > Dynamic DNS
LABEL
DESCRIPTION
Dynamic DNS Setup
Enable Dynamic
DNS
Enable Dynamic
DNS
Select this to use dynamic DNS.
Service
Provider
Provider
Select the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Type
Select the type of service that you are registered for from your Dynamic
DNS service provider.
DNS service provider.
Host Name
Enter the host name. You can specify up to two host names, separated
by a comma (",").
by a comma (",").
User Name
Enter your user name.
Password
Enter the password assigned to you.
Enable Wildcard
Option
Option
Select this to enable the DynDNS Wildcard feature.
Enable offline
option (Only
applies to
custom DNS)
option (Only
applies to
custom DNS)
This field is available when CustomDNS is selected in the DDNS Type
field. Select this if your Dynamic DNS service provider redirects traffic
to a URL that you can specify while you are off line. Check with your
Dynamic DNS service provider.
field. Select this if your Dynamic DNS service provider redirects traffic
to a URL that you can specify while you are off line. Check with your
Dynamic DNS service provider.
IP Address Update Policy
Use WAN IP
Address
Use WAN IP
Address
Select this if you want the MAX-207HW2R to update the domain name
with the WAN port's IP address.
with the WAN port's IP address.