ZyXEL Communications Corporation IX280P Manual De Usuario

 Chapter 9 The System Configuration Screens

MAX-207HW2R User’s Guide

When the MAX-207HW2R uploads new firmware, the process usually takes about 
two minutes. The device also automatically restarts in this time. This causes a 
temporary network disconnect.

Note: Do not turn off the device while firmware upload is in progress!

After two minutes, log in again, and check your new firmware version in the 
Status screen. You might have to open a new browser window to log in.

If the upload is not successful, you will be notified by error message.

Click Return to go back to the Firmware screen.

Click ADVANCED > System Configuration > Configuration to back up or 
restore the configuration of the MAX-207HW2R. You can also use this screen to 
reset the MAX-207HW2R to the factory default settings.

Figure 38   ADVANCED > System Configuration > Configuration

Browse... 

Click this to find the *.bin file you want to upload.

Upload 

Click this to begin uploading the selected file. This may take up to two 
minutes.

Note: Do not turn off the device while firmware upload is in 

progress!

Table 33   ADVANCED > System Configuration > Firmware (continued)