ZyXEL Communications Corporation IX280P Manual De Usuario
Chapter 9 The System Configuration Screens
MAX-207HW2R User’s Guide
93
9.3.1 The Firmware Upload Process
When the MAX-207HW2R uploads new firmware, the process usually takes about
two minutes. The device also automatically restarts in this time. This causes a
temporary network disconnect.
two minutes. The device also automatically restarts in this time. This causes a
temporary network disconnect.
Note: Do not turn off the device while firmware upload is in progress!
After two minutes, log in again, and check your new firmware version in the
Status screen. You might have to open a new browser window to log in.
Status screen. You might have to open a new browser window to log in.
If the upload is not successful, you will be notified by error message.
Click Return to go back to the Firmware screen.
9.4 Configuration
Click ADVANCED > System Configuration > Configuration to back up or
restore the configuration of the MAX-207HW2R. You can also use this screen to
reset the MAX-207HW2R to the factory default settings.
restore the configuration of the MAX-207HW2R. You can also use this screen to
reset the MAX-207HW2R to the factory default settings.
Figure 38 ADVANCED > System Configuration > Configuration
Browse...
Click this to find the *.bin file you want to upload.
Upload
Click this to begin uploading the selected file. This may take up to two
minutes.
minutes.
Note: Do not turn off the device while firmware upload is in
progress!
Table 33 ADVANCED > System Configuration > Firmware (continued)
LABEL
DESCRIPTION