ZyXEL Communications Corporation NBG418NV2 Manual De Usuario

 Chapter 4 Modes

Note: Wait while the NBG-418N restarts, then log in to the Web Configurator again.

Click on Status. The screen below shows the status screen in Client Bridge Mode. 

Status Screen (Client Bridge Mode) 

The following table describes the labels shown in the Status screen.

Status Screen (Client Bridge Mode)

Device Information

System Name

This is the System Name you enter in the Maintenance > System > 
General screen. It is for identification purposes.

Firmware Version

This is the current firmware version of the NBG-418N. 

WLAN Information

- SSID

This is the name of the selected AP that the NBG-418N is associating with. 

- Operating Channel

This shows the channel that is used to connect to the selected AP.

- Security Mode

This shows the wireless security the NBG-418N is using to connect to the AP.

- Connection Status

This shows whether the NBG-418N is currently associated with the selected AP.

LAN Information

- MAC Address

This shows the LAN Ethernet adapter MAC Address of your device.

- IP Address

This shows the LAN port’s IP address.

- IP Subnet Mask

This shows the LAN port’s subnet mask.

- DHCP

This shows the LAN port’s DHCP role - None.

System Status

Operation Mode

This field shows the device operation mode: Router, Access Point, Client 
Bridge or Universal Repeater.

System Up Time

This is the total time the NBG-418N has been on.