ZyXEL Communications Corporation NWD211AN Manual De Usuario

Chapter 4 ZyXEL Utility - Station Mode

NWD-211AN User’s Guide

Follow the steps below to add a new profile.

1 Click Add in the Profile screen. The Add New Profile screen displays as shown next. 

Figure 39   Profile: Add a New Profile 

The following table describes the labels in this screen.   

Table 15   Profile: Add a New Profile 

Add New Profile

Profile Name

Enter a descriptive name in this field.

SSID

Select an available wireless device in the Scan Info table and click Select, or 
enter the SSID of the wireless device to which you want to associate in this field 
manually. Otherwise, enter Any to have the NWD-211AN associate to any AP or 
roam between any infrastructure wireless networks.

Network Type

Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer 
computer.

Next

Click Next to go to the next screen.

Exit

Click Exit to go back to the previous screen without saving.

Scan Info

This table displays the information of the available wireless networks within the 
transmission range.

,

,

 or

denotes that the wireless device is in infrastructure mode and the wireless 
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless 

security is deactivated.

denotes that the wireless device is in Ad-Hoc mode and the wireless 
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless 

security is deactivated.

SSID

This field displays the SSID (Service Set IDentifier) of each AP or peer device.