ZyXEL Communications Corporation NWD211AN Manual De Usuario

 Chapter 4 ZyXEL Utility - Station Mode

NWD-211AN User’s Guide

2 If you select the Infrastructure network type in the previous screen, skip to step

 3

. If 

you select the Ad-Hoc network type in the previous screen, a screen displays as follows. 
Select a Channel number and Wireless Mode and click Next to continue.

"

To associate to an ad-hoc network, you must use the same channel as the 
peer computer.

Figure 40   Profile: Wireless Settings 

The following table describes the labels in this screen. 

3 If you selected Infrastructure network type in the first screen, select WEP, WPA, 

WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data 
encryption. If you selected Ad-Hoc network type in the first screen, you can use only 
WEP encryption method. Otherwise, select DISABLE to allow the NWD-211AN to 
communicate with the access points or other peer wireless computers without any data 
encryption, and skip to step

 5

.

Scan

Click Scan to search for available wireless devices within transmission range.

Select

Select an available wireless device in the table and click Select to add it to this 
profile.
Whenever you activate this profile, the NWD-211AN associates to the selected 
wireless network only.

Table 15   Profile: Add a New Profile  (continued)

Table 16   Profile: Wireless Settings 

Wireless Settings

Channel

Select a channel number from the drop-down list box. To associate to an ad-hoc 
network, you must use the same channel as the peer computer.

Wireless Mode

This is the wireless standard the NWD-211AN uses. In Ad-Hoc mode, you can use 
only 802.11b or 802.11g.