ZyXEL Communications Corporation NWD271N Manual De Usuario

 Chapter 4 ZyXEL Utility - Windows

NWD271N User’s Guide

Configure WPA-PSK/WPA2-PSK security in this screen.

"

The procedure to configure WPA or WPA2 is different in Windows Vista. See 

 for information on setting up your NWD271N to use 

WPA or WPA2 in Vista.

Figure 30   Security Setting: WPA-PSK/WPA2-PSK

Key x (where x is 
a number 
between 1 and 4)

Select this option if you want to manually enter the WEP keys. Enter the WEP key 
in the field provided.
If you select 64 Bits in the WEP field.

Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 
example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 
(for example, MyKey) for ASCII key type. 

If you select 128 Bits in the WEP field,

Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 
(for example, MyKey12345678) for ASCII key type.

Note: The values for the WEP keys must be set up exactly the 

same on all wireless devices in the same wireless LAN. 
ASCII WEP keys are case sensitive.

Back

Click Back to go to the Site Survey screen to select and connect to another 
network.

Next

Click Next to confirm your selections and advance to the Summary screen. Refer 
to 

Exit

Click Exit to return to the Site Survey screen without saving.

Table 8   Security Setting: WEP  (continued)