ZyXEL Communications Corporation NWD271N Manual De Usuario
Chapter 4 ZyXEL Utility - Windows
NWD271N User’s Guide
56
The following table describes the labels in this screen.
4.4.1.3 WPA/WPA2
The screen that displays when you select WPA or WPA2 differs, depending on the EAP Type
you select (TLS, PEAP or TTLS).
you select (TLS, PEAP or TTLS).
Figure 31 Security Settings: WPA/WPA2
The following table describes the labels in this screen.
Table 9 Security Setting: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
Encryption Type
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Section 3.3.1.3 on page 40
for more information.
Pre-Shared Key
Type a pre-shared key (same as the AP or peer device) of between 8 and 63
case-sensitive ASCII characters (including spaces and symbols) or 64
hexadecimal characters.
case-sensitive ASCII characters (including spaces and symbols) or 64
hexadecimal characters.
Back
Click Back to go to the Site Survey screen to select and connect to another
network.
network.
Next
Click Next to confirm your selections and advance to the Summary screen. Refer
to
to
Exit
Click Exit to return to the Site Survey screen without saving.
Table 10 Security Setting: WPA/WPA2
LABEL
DESCRIPTION
Encryption Type
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Section 3.3.1.3 on page 40
for more information.
EAP Type
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS, PEAP
and TTLS (at the time of writing, TTLS is not available in Windows Vista).
Select an authentication method from the drop down list. Options are TLS, PEAP
and TTLS (at the time of writing, TTLS is not available in Windows Vista).
Login Name
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This is the user name that you or an administrator set up on a RADIUS server.
Password
This field is not available when you select TLS in the EAP Type field.
Enter the password associated with the user name above.
Enter the password associated with the user name above.