ZyXEL Communications Corporation WRE6505 Manual De Usuario

 Chapter 9 Wireless LAN

WRE6505 User’s Guide

hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of 
the devices to configure this screen.

To change your WRE6505’s MAC Address List settings, click Network > Wireless LAN (2.4G/5G) 
> MAC Filter. The screen appears as shown.

Network > Wireless LAN (2.4G/5G) > MAC Filter 

The following table describes the labels in this menu.

Network > Wireless LAN (2.4G/5G)> MAC Address List

Active

Select this to enable MAC address filtering.

SSID for MAC 
Filter

Select the SSID for which you want to configure MAC filtering.

MAC Address 
Filter

Select Enable to allow MAC address filtering (default: Disable).

Filter Action

Select Disable to deactivate the MAC filtering rule.

Select Allow to permit access to the WRE6505, MAC addresses not listed will be denied 
access to the WRE6505.

Set

This is the index number of the MAC address.

MAC Address

Enter the MAC addresses of the wireless station to include in the rule. Enter the MAC 
addresses in a valid MAC address format, that is, six hexadecimal character pairs, for 
example, 12:34:56:78:9a:bc.

Apply

Click Apply to save your changes back to the WRE6505.

Cancel

Click Cancel to return to the previous menu without saving.