ZyXEL Communications Corporation WRE6505 Manual De Usuario
Chapter 12 Troubleshooting
WRE6505 User’s Guide
77
12.2 WRE6505 Access and Login
I don’t know the IP address of my WRE6505.
1
Click Start > Run, enter cmd, and then enter Ping zyxelsetup.
2
The default IP address is 192.168.1.2.
Note: In Repeater mode, you can access the login screen by using the IP address
(192.168.1.2) or by typing “http://zyxelsetup” in your browser IP address bar.
While in AP mode, connect the WRE6505 to your router (configured under same
subnet) and type “http://zyxelsetup” in your browser IP address bar.
3
If you changed the IP address and have forgotten it, you might get the IP address of the WRE6505
by looking up the IP address of the default gateway for your computer. To do this in most Windows
computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default
Gateway might be the IP address of the WRE6505 (it depends on the network), so enter this IP
address in your Internet browser. Login (see the Quick Start Guide for instructions) and go to the
Device Information table in the Status screen. Your WRE6505’s IP address is available in the
Device Information table.
by looking up the IP address of the default gateway for your computer. To do this in most Windows
computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default
Gateway might be the IP address of the WRE6505 (it depends on the network), so enter this IP
address in your Internet browser. Login (see the Quick Start Guide for instructions) and go to the
Device Information table in the Status screen. Your WRE6505’s IP address is available in the
Device Information table.
• If the DHCP setting under LAN information is None, your device has a fixed IP address.
• If the DHCP setting under LAN information is Client, then your device receives an IP
• If the DHCP setting under LAN information is Client, then your device receives an IP
address from a DHCP server on the network.
4
If your WRE6505 is a DHCP client, you can find your IP address from the DHCP server. This
information is only available from the DHCP server which allocates IP addresses on your network.
Find this information directly from the DHCP server or contact your system administrator for more
information.
information is only available from the DHCP server which allocates IP addresses on your network.
Find this information directly from the DHCP server or contact your system administrator for more
information.
5
Reset your WRE6505 to change all settings back to their default. This means your current settings
are lost. See
are lost. See
in the Troubleshooting for information on resetting your
WRE6505.
I forgot the username and password.
1
The default username is admin and default password is 1234.
2
If this does not work, you have to reset the device to its factory defaults. See
I cannot see or access the Login screen in the Web Configurator.
1
Make sure you are using the correct IP address.