Garmin International Inc 01088 Manual De Usuario

 appears on the screen while the device saves track log data 

and turns off.
If you need to remove the battery, wait until the screen turns off 

before removing the battery.

You can use REC to turn the device on and off in recording 

mode. This feature allows you to start recording quickly, while 

automatically turning off the device to conserve battery power 

when you are not recording.
NOTE: The device does not turn off using REC unless you use 

REC to turn on the device.

With the device turned off, slide REC toward the lens.
The device turns on and starts recording video.

When you are finished recording, slide REC away from the 

lens.
The device stops recording and turns off.

You can operate your device in several modes.
VIEWFINDER: Displays the camera viewfinder and status 

information.

PLAYBACK: Allows you to view recorded videos and photos.
DASHBOARD: Displays sensor data in charts and data fields 

(VIRB Elite only).

SETUP: Allows you to change camera settings.

Select MODE to cycle through the available modes.

The modes cycle from left to right. The icon for the selected 

mode appears larger, and the name of the selected mode 

appears at the bottom of the screen.

Stop selecting MODE when the desired mode appears.

You can use the viewfinder to set up shots, view status 

information, and level the camera (VIRB Elite only).
Select MODE > VIEWFINDER.

À

Battery status

Á

Recording time remaining on the memory card

Â

Current video mode

Select to view the level (

Select to view the status page (

NOTE: This feature is available for VIRB Elite only.
You can use the on-screen level when you mount the device to 

ensure your videos and photos are perfectly level.

Select MODE > VIEWFINDER >  .
The level appears.

Adjust the device until the degree of roll 

À

 and degree of 

pitch 

Á

 are both 00°, and the brown section of the level 

Â

 is 

even with the horizon line 

Ã

.

You can calibrate the level if it does not seem accurate. It may 

be necessary to calibrate the level when using the device in 

extreme temperatures.

Place the device flat on a level surface, with the screen 

facing up.

Select MODE > VIEWFINDER >  .

Select OK.

The status page provides at-a-glance details about the current 

settings of your device. Select MODE > VIEWFINDER >  .

À

Displays the video mode, field of view, elapsed time, interval or 
loop setting (if set), number of videos, and time remaining on the 
memory card.

Á

Displays the photo resolution, camera mode, timer count (if set), 
photos remaining, and number of photos.

Â

Displays the sensors (VIRB Elite only) including Wi-Fi®, cadence, 
heart rate, tempe™, and GPS.

NOTE: If the battery power becomes very low while recording 

video, the device automatically stops recording, saves the 

video, and safely turns off.

Slide REC toward the lens to start recording video.
If the device is off, it turns on automatically. The device starts 

recording video, and the viewfinder appears.

Viewfinder

3