Garmin International Inc 03164 Manual De Usuario

Place the rubber pad around the

bar:
• If the bar diameter is

25.4 mm, use the thicker pad.

• If the bar diameter is

31.8 mm, use the thinner pad.

Place the bar connector around

the rubber pad.

Replace and tighten the screw.
NOTE: Garmin

recommends a torque

specification of 7 lbf-in. (0.8 N-m). You

should check the tightness of the

screw periodically.

Align the tabs on the back of the

device with the mount notches

Press down slightly and turn the

device clockwise until it locks into

place.

8VLQJ WKH GHYLFH

If your device was packaged with an

ANT+

sensor, they are already paired and

can be activated during initial setup.

Hold

to turn on the device.

Go outside, and wait while the device

locates satellites.
The satellite bars turn green when the

device is ready.

From the home screen, select .

Select to start the activity timer.

Quick Start Manual