Davis Instruments DWW6312 Manual De Usuario

37

While your Vantage Pro2 weather station is designed to provide years of 
trouble-free operation, occasional problems may arise. If you are having a 
problem with your station, please consult this troubleshooting guide before 
calling Davis technical support. You may be able to quickly solve the 
problem yourself. If you need help, please see “One Year Limited War-
ranty” on page 42.

Note: 

Refer to the ISS Installation Manual for additional troubleshooting information. 

Display is blank

Unit is not receiving power. Check the power adapter connections 

and/or replace batteries.

Display shows dashes in 

place of weather data

•

ISS not plugged in (cabled station). See ISS manual.

•

Sensors not transmitting (wireless station). See ISS (or other 

transmitter) manual.

•

Console not receiving (wireless station) - See “Troubleshooting 

Reception Problems” on page 38.

•

A reading has exceeded the limits indicated in the specifica-

tions table.

•

Calibration numbers may be causing readings to exceed dis-

play limits. Check calibration number and adjust if necessary.

Console is sluggish or does 

not work at low temperatures

The console and display may not work below 32º F (0º C). Use an 

External Temperature sensor in low-temperature locations or install 

the console indoors.

Display “locks up”

If the console “locks up”, reset the console by removing AC and bat-

tery power then restoring power. If this occurs frequently in an AC-

powered console, plug the AC power-adapter into a surge suppres-

sor.

Inside humidity seems too 

high or too low

Make sure the console is not near a humidifier or de-humidifier. 

Check calibration number and adjust if necessary. If inside humidity 

is low, and inside temperature is too high, see “inside temp” below. 

Also make sure the console backlight is not on.

Wind speed reading seems 

too high or too low.

For low readings, remove the wind cups and check for friction 

sources. Check the anemometer location. Is it sheltered from the 

wind? See ISS manual for additional wind speed troubleshooting 

information.

Wind speed reads 0 either all 

the time or intermittently

The problem may be with the anemometer. Test anemometer by 

spinning wind cups. Check fields one-b and two-b on diagnostic 

screen and call technical support.