Davis Instruments DWW765Y Manual De Usuario
19
Repeat the test process to verify communication for every repeater in the network. Use
the following diagram to verify the repeater and transmitter DIP switch positions in an
example combination network:
the following diagram to verify the repeater and transmitter DIP switch positions in an
example combination network:
Verifying Repeater Communication with a Console
The console is configured the same way it is configured in a Single Repeater installation,
except that the repeater ID that is selected is the last repeater in the chain. and is selected
for all stations being repeated.
except that the repeater ID that is selected is the last repeater in the chain. and is selected
for all stations being repeated.
On the Console in Screen 2: Configuring Transmitter IDs:
1. Find the transmitter IDs transmitting through the repeaters, and if the stations are not
already toggled on with station types selected, do so now. Turn a station on by
pressing the up arrow until “ON” displays on the screen. Change the station type by
pressing GRAPH until the correct station type displays.
pressing the up arrow until “ON” displays on the screen. Change the station type by
pressing GRAPH until the correct station type displays.
2. For each transmitting station, press WIND turn the repeater function on and to display
repeater ID information. Keep pressing WIND until the Repeater ID for the last
repeater (repeater closest to the console) is displayed.
repeater (repeater closest to the console) is displayed.
Note:
Even if there are multiple repeaters transmitting multiple stations, the only repeater that needs to be
programmed into the console is the last repeater in the chain, the repeater that is the closest to the
console.
programmed into the console is the last repeater in the chain, the repeater that is the closest to the
console.
3. Continue selecting, turning on and enabling the repeater function for each transmitter
in the network.
4. Press DONE to continue to the other screens in the Setup Mode, or press and hold
DONE to return to the Current Weather Mode.
Repeater
Repeater
4
5
C
3
3
B
Repeater
1
2
A
2
1
4
5
4
3
2
1
5
Vantage Pro2
Console/Receiver
2
1
2
3
1
A
B
C
C
Any Vantage Pro2
Station
Any Vantage Pro2
Station
Any Vantage Pro2
Station
Any Vantage Pro2
Station
Any Vantage Pro2
Station
Transmitter DIP
Switch with
IDs 1, 2 ON
Repeater DIP
Switch set to ID A
Transmitter DIP Switch
with ID 3 ON
Repeater DIP
Switch set to ID B
Transmitter DIP
Switch with
IDs 4, 5 ON
Repeater DIP
Switch set to ID C
1