Davis Instruments DWW765Y User Manual

19

Repeat the test process to verify communication for every repeater in the network. Use 
the following diagram to verify the repeater and transmitter DIP switch positions in an 
example combination network:

The console is configured the same way it is configured in a Single Repeater installation, 
except that the repeater ID that is selected is the last repeater in the chain. and is selected 
for all stations being repeated.

On the Console in Screen 2: Configuring Transmitter IDs:

1. Find the transmitter IDs transmitting through the repeaters, and if the stations are not 

already toggled on with station types selected, do so now. Turn a station on by 
pressing the up arrow until “ON” displays on the screen. Change the station type by 
pressing GRAPH until the correct station type displays.

2. For each transmitting station, press WIND turn the repeater function on and to display 

repeater ID information. Keep pressing WIND until the Repeater ID for the last 
repeater (repeater closest to the console) is displayed.

Note: 

Even if there are multiple repeaters transmitting multiple stations, the only repeater that needs to be 
programmed into the console is the last repeater in the chain, the repeater that is the closest to the 
console.

3. Continue selecting, turning on and enabling the repeater function for each transmitter 

in the network.

4. Press DONE to continue to the other screens in the Setup Mode, or press and hold 

DONE to return to the Current Weather Mode.