Lexmark International Inc N8050 Manual De Usuario
Using the Wireless Setup Utility
9
5
Select the appropriate encryption for the network. The type of encryption that can be used is
dependent on the authentication type that was selected in step 4.
dependent on the authentication type that was selected in step 4.
For Open:
•
No Encryption
•
WEP
For Shared:
•
WEP
For WPA Personal:
•
TKIP
For 802.1x — RADIUS:
•
No Encryption
•
WEP (dynamic keys)
•
WEP (static keys)
•
WPA-TKIP
6
If 802.1x — RADIUS using EAP-TLS is the intended authentication type, a certificate request
is needed to obtain a signed certificate for the device. For instructions on requesting a new
signed certificate, see
is needed to obtain a signed certificate for the device. For instructions on requesting a new
signed certificate, see
.
If a different 802.1x — RADIUS
authentication mechanism is used, skip to step 7.
7
Configure authentication and encryption. If none of the following options are selected,
continue to step 8.
continue to step 8.
If 802.1x — RADIUS was selected as the authentication type, click
Configure
Authentication
, and follow the
instructions.
If
WPA Personal
was selected as the encryption type, click
Configure Encryption
, and
follow the
instructions.
If
WEP
or
WEP (static keys)
was selected as the encryption type, click
Configure
Encryption
, and follow the
instructions.
8
Click
Apply
.
9
Click
OK
.
10
Click
OK
to close the utility.
Configuring the authentication mechanism
•
If
EAP-MD5
,
MSCHAPv2
, or
LEAP
is selected as the authentication mechanism:
1
Enter an appropriate username and password for the 802.1x — RADIUS authentication
server.
server.
2
Confirm the password.